UVC Fully Automatic Sterilizer for Gas Stations


  1. Clinically proven to eliminate 99.9% of all viruses, bacteria, fungi, mold, yeast, algae, amoebas, and other germs and allergens within seconds of 253.7 nm UVC exposure.
  2. Install-and-forget system runs without intervention to keep customers safe.
  3. A motion sensor deactivates the lamp when it detects movement in front of the pump.
  4. Contact-free disinfection reduces the chance of human error and cross-contamination.
  5. Hypoallergenic sanitizing does not leave irritants or toxic chemicals behind.
  6. Reduces the need to buy and handle corrosive cleaners. (Does not replace soap/water)

Download Data Sheet


Make sure the device is wired correctly and installed without compromising the gas pump  (mounting options available). Once the fixture is attached simply use the power switch on the back of the driver box to turn it on. When it is powered on the intelligent programming will activate the UVC Fully Automatic Sterilizer for 60 seconds after each visitor. This ensures that each customer has a safe experience without exposure to illness-causing pathogens.

Motion Sensor: The sensor automatically begins a new cycle when motion is detected. After the area is clear the light will turn on for 60 seconds. If motion is detected in front of the pump during a cycle the light temporarily deactivates until the area is clear again. The motion sensor is precise enough to only trigger in front of the pump it is attached to, and is not affected by other pumps behind or across from itself.


Contact Us

13261 Timberline Plaza, Suite B | Piedmont, SD 57783